GW6B Series

Product use and characteristics

GW6B is used to disconnect or connect high-voltage lines without load in order to convert high-voltage lines, change the mode of operation, and implement safe electrical isolation of overhauling busbars from high-voltage electrical equipment such as circuit breakers.

The product can be arranged directly below the bus bar, and its static contact is suspended on the overhead hard bus bar or the soft bus bar. The product forms a vertical insulation fracture after opening, and the floor area is especially significant in the substation with "double bus with bypass bus" connection.

The isolation switch can be attached with a ground switch for the ground of the lower bus bar. The ground of the upper bus bar requires an independent ground switch. The isolation switch is equipped with SRCJ3 type motor operating mechanism three-pole linkage operation, and the ground switch is equipped with SRCS type manual operating mechanism or SRCJ type electric mechanism three-pole linkage operation.

Product parameter